July 8, 2009 on 8:34 pm | In Aastra |
This post will walk you step by step through configuring an Aastra 57i CT to
register with Trixbox PBX system versions 2.4.0 - 2.6.2.
Step 1 - Plug phone into the LAN.
Step 2 - Take note of DHCP address to appear during boot process.
Step 3 - From a computer on the same network. Type the IP address in the URL field of the internet browser of your choice. You will be prompted for a user ID and password. (default username: admin default password:22222)
Step 4 – Click on the Global Sip link on the left and configure the following fields.
* Screen Name - Type the users first and last name or what your would like the display to read on the phone
* Screen Name2 - Type the extension
* Phone Number - Type the extension
* Caller ID - Type the Name of of the User or what you would like to Display to other phones when calling internally.
* Authentication Name - Type the extension
* Password - Type the password associated with the extension
* Proxy Server - Type the IP address of the Trixbox server.
* Proxy Port- Type 5060
* Registrar Server - Type the IP address of the Trixbox server.
* Registrar Port - Type 5060
Step 5 - Click on the Save Settings button at the bottom of the page.
Step 6 - Click on the Preferences link on the left and configure the following fields.
* Digit Timeout (seconds) = 4
Step 7 - click on the Save Settings button at the bottom of the page.
Step 8 - Click on the Network link on the left and configure the following fields.
* DHCP = uncheck
* IP Address = I recommend making the last 3 of the ip address the ext. for example if the ext is 112. Make the IP address 10.0.1.112. This helps easily keep track the static IP addresses.
* Subnet Mask = 255.255.255.0
* Gateway = 10.0.1.1 or IP address or router providing DHCP.
* Primary DNS = 10.0.1.1 or the router or the source providing DNS.
* NTP Time Servers = enable
* Time Server 1 = pool.ntp.org (I use this as my NTP time server and have been a member of the site for a long time. It works very well)
Step 8 - click on the Save Settings button at the bottom of the page.
Step 9 - Click on the Reset link on the left.
Step 10 - Click on the Restart button.
When the phone boots up it will register to the Trixbox server and you will be able to test making an outbound and inbound call.